RG-S5750-24SFP4XS24DP-UP Thiết bị chuyển mạch - 1

RG-S5750-24SFP4XS24DP-UP Thiết bị chuyển mạch - 2

RG-S5750-24SFP4XS24DP-UP Thiết bị chuyển mạch - 3

RG-S5750-24SFP4XS24DP-UP Thiết bị chuyển mạch - 4

RG-S5750-24SFP4XS24DP-UP Thiết bị chuyển mạch - 5

RG-S5750-24SFP4XS24DP-UP Thiết bị chuyển mạch - 6

RG-S5750-24SFP4XS24DP-UP Thiết bị chuyển mạch - 7

RG-S5750-24SFP4XS24DP-UP Thiết bị chuyển mạch - 8

RG-S5750-24SFP4XS24DP-UP Thiết bị chuyển mạch - 9

RG-S5750-24SFP4XS24DP-UP Thiết bị chuyển mạch - 10

RG-S5750-24SFP4XS24DP-UP Thiết bị chuyển mạch - 11

Hình ảnh

RG-S5750-24SFP4XS24DP-UP, 24-Port Gigabit All-Optical Ethernet PoF Switch, 10GE Uplink, Hybrid Cable Connection, Up to 100 W Power Output per Port

Applied in Ruijie Networks Power over Fiber (PoF) Solution, integrated installation and O&M for power and optical transmission over hybrid cables

Model

RG-S5750-24SFP4XS24DP-UP

24 x GE optical ports, 1 x DB78 power port, 4 x 10GE optical ports

Datasheet Sales Enquiry

Tính năng nổi bật

Hybrid cable connection in Ruijie Networks PoF Solution, providing worry-free remote power supply
Virtual Switching Unit (VSU), delivering flexible networking and high performance
Hardware-level redundancy, enhancing system reliability
Multiple security policies to prevent network attacks and ensure high network robustness
INC controller, offering simplified and efficient O&M

Features
Specifications
Resources
Order Information
FAQ

Sales Enquiry

Features

24-Port Aggregation All-Optical Ethernet PoF Switch on Building Side RG-S5750-24SFP4XS24DP-UP

The switch supports up to 24 hybrid cables, each capable of supplying up to 100 W of power and transmitting optical signals to connected devices. This integrates power and optical transmission and simplifies installation and O&M.

Connection over Hybrid Cables in PoF Solution and Centralized Deployment, Enabling Worry-free Remote Power Supply

The switch utilizes a hybrid cable that implements both high-bandwidth data transmission and remote PoF power supply, realizing integrated installation and O&M, and simplifying all-optical network deployment.

Extended Transmission Range

The connection distance between a PoF switch and an SOE indoor switch can reach up to 1,500 meters.

Increased Power Capacity

A single port can deliver a maximum power of 100 W, while the entire switch supports a maximum power supply of 2400 W (24 x 100 W).

Enhanced Power Supply

The switch can connect 24 SOE switches or photoelectric access points (APs).
Hybrid cables are used to provide secure power supplies from the equipment room, eliminating the need for local high-voltage power sources.

VSU, Delivering Flexible Networking Capabilities and High Performance

VSU technology virtualizes multiple physical switches into one logical unit to realize unified management, simplifying O&M.
A VSU connects to peripheral devices through aggregate links. If a fault occurs, data can be switched to another link within seconds, ensuring service continuity.
Devices can be added to or removed from a VSU, without affecting normal operation of other devices.

Hardware- and Software-level Redundancy, Enhancing System Reliability

The switch utilizes a hybrid cable that implements both high-bandwidth data transmission and remote PoF power supply, realizing integrated installation and O&M, and simplifying all-optical network deployment.

Dual-boot Redundancy

Two flash chips are used to store boot software, enabling automatic backup of the boot file and operating system. This prevents device startup failure caused by flash chip malfunction, ensuring smooth services.

1+N Power Supply Redundancy

A maximum of three power modules can be configured, supporting redundancy and hot swapping and ensuring continuous system power supply.

Network Security Policies and Real-Time Monitoring, Delivering Enhanced Network Robustness

CPP

NFPP

CPP protects the CPU from data attacks to ensure CPU stability under high usage, achieving significant improvement in the device's security performance.

INC Controller Achieves Easy and Efficient O&M Management

The switch automatically completes registration and configuration after it accesses the all-optical network, achieving plug and play, no commissioning and fast onboarding.

You can check the link health status, handle alarms and troubleshoot faults through the INC, which dramatically improves the O&M efficiency.

A switch can be flexibly replaced based on service needs without reconfiguration. Service ports supports auto-sensing, achieving automatic O&M.

Fast onboarding

Optical Link O&M

Zero Touch Replacement

Specifications

Hardware Specifications	RG-S5750-24SFP4XS24DP-UP
Port	24 x 1000M SFP ports, 4 x 1G/10G SFP+ ports, and 24 x power output ports
Switching capacity	128 Gbps
Packet forwarding rate	96 Mps
Power module slot	3
Power module type	Available model: RG-PA600I-P-F AC input Rated voltage range: 200 V AC to 240 V AC Maximum voltage range: 176 V AC to 264 V AC Frequency: 50 Hz to 60 Hz Rated current per input: 8 A Available model: RG-PA1000I-P-F AC input Rated voltage range: 200 V AC to 240 V AC Maximum voltage range: 176 V AC to 264 V AC Frequency: 50 Hz to 60 Hz Rated current per input: 8 A
SFP port	1000Base-X 100Base-X
SFP+ port	10GBase-R 1000Base-X
RTC	Supported
Power consumption	< 85 W
Operating temperature	0°C to 45°C (32°F to 113°F) at the altitude of 0 m to 1,800 m (0 ft. to 5905.51 ft.) At the altitude ranging from 1800 m (5905.51 ft.) to 5000 m (16404.20 ft.), the temperature decreases by 1°C (1.8°F) each time the altitude increases by 220 m (721.79 ft.).
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Operating humidity	10% to 90% RH
Operating altitude	0 m to 5000 m (0 ft. to 16404.20 ft.)
Storage humidity	5% to 95% RH
Fan module	Fan speed regulating and fault alarms
Temperature alarms	Supported
EMI	GB/T9254.1-2021 Class A
Safety standard	GB4943-2011
Dimensions (W x D x H)	442 mm x 420 mm x 43.6 mm (17.40 in. x 16.54 in. x 1.72 in.)
Weight (including power modules)	10 kg (22.05 lbs)

Software Specifications	RG-S5750-24SFP4XS24DP-UP
802.1Q VLAN	4K 802.1Q VLAN Port-based VLAN MAC address-based VLAN Private VLAN Voice VLAN GVRP
QinQ	Basic QinQ Selective QinQ
ACL	Standard IP ACLs (hardware ACLs based on IP addresses) Extended IP ACLs (hardware ACLs based on IP addresses or TCP/UDP port numbers) Extended MAC ACLs (hardware ACLs based on source MAC addresses, destination MAC addresses, and optional Ethernet type) Time range-based ACL Expert-level ACLs (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range) ACL80 IPv6 ACL Global ACL ACL redirection
QoS	Traffic identification on an interface Rate limiting on an interface Traffic classification based on 802.1p priorities, DSCP priorities, and IP precedences Eight queues on each interface SP, WRR, SP+WRR, and RED/WRED
Mirroring	1:1 mirroring, N:1 mirroring, and 1:N mirroring RSPAN Local and remote flow-based mirroring
DHCP	DHCP server DHCP client DHCP snooping DHCP relay DHCPv6 snooping DHCPv6 client DHCPv6 relay
Security	Binding of IPv4 addresses, MAC addresses, and interface numbers Binding of IPv6 addresses, MAC addresses, and interface numbers Filtering unauthorized MAC addresses Interface- and MAC address-based 802.1X authentication MAB Portal and Portal 2.0 authentication ARP check DAI ARP rate limiting ARP spoofing prevention Broadcast storm suppression Hierarchical management and password protection RADIUS and TACAS+ AAA (IPv4/IPv6) for device login management SSH and SSHv2.0 BPDU guard IP source guard CPP and NFPP Port security
Ring network protocol	ERPS (G.8032), compatibility with third-party ERPS-capable products
PoE	IEEE 802.3af and 802.3at Automatic and energy-efficient power supply management modes Warm start Scheduled power-on and power-off of PoE ports based on the time range Port priority
IP routing	IPv4/IPv6 static route RIP, RIPng, OSPFv2, OSPFv3, BGP, and IS-IS Routing Policy
Basic IPv6 protocols	IPv6 addressing, ND, ICMPv6, IPv6 ping, IPv6 tracert, and IPv6 multicast
SAVI	Defense against NS/NA/RS/RA packet attacks Preventing private IPv6 address allocation Unauthorized terminal information buffering
VSU	Local and remote stacking Link bundling across the chassis inside the VSU Virtualization through standard service interfaces
Zero Touch Provisioning (ZTP)	CWMP (TR069)
Management	SNMPv1/v2c/v3, CLI (Telnet/console), RMON (1, 2, 3, 9), SSH, Syslog, NTP/SNTP, web, debugging, FTP, TFTP, sFlow, and Ruijie Cloud

Resources All Resources

Learn about Products or Solutions

Product Datasheet

Installation

Installation Guide

Software and Configuration

Configuration Guide

Order Information

Chassis, Power Module, and Accessories

Model	Description
RG-S5750-24 SFP4XS24DP-UP	Aggregation all-optical switch (PoF switch) for buildings, 24-port fixed all-optical switch 24 x downlink combo ports (1GE SFP port and DB78 port) 4 x 1GE/10GE uplink SFP+ ports with auto-negotiation 24 power outputs over hybrid cables, with a maximum of 100 W per output, and up to 2,400 W per device Up to three power modules
RG-PA1000I-P-F	1000 W AC power module
RG-PA600I-P-F	600 W AC power module
RG-24DUP1DB48LC	Hybrid cable termination box, 24 power outputs per panel, configured based on the number of hybrid cables

Model	Description
OEHC-0.5-1000M	Hybrid cable, cross sectional area of 0.5 mm2, each bundle of 1,000 m (3,280.84 ft.), configured according to the solution
OEHC-1.5-1000M	Hybrid cable, cross sectional area of 1.5 mm2, each bundle of 1,000 m (3,280.84 ft.), configured according to the solution

FAQ Ask a Question

Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.

Education

5-Star Hotel Solution

RG-S5750-24SFP4XS24DP-UP, 24-Port Gigabit All-Optical Ethernet PoF Switch, 10GE Uplink, Hybrid Cable Connection, Up to 100 W Power Output per Port

24-Port Aggregation All-Optical Ethernet PoF Switch on Building Side RG-S5750-24SFP4XS24DP-UP

The switch supports up to 24 hybrid cables, each capable of supplying up to 100 W of power and transmitting optical signals to connected devices. This integrates power and optical transmission and simplifies installation and O&M.

Connection over Hybrid Cables in PoF Solution and Centralized Deployment, Enabling Worry-free Remote Power Supply

The switch utilizes a hybrid cable that implements both high-bandwidth data transmission and remote PoF power supply, realizing integrated installation and O&M, and simplifying all-optical network deployment.

VSU, Delivering Flexible Networking Capabilities and High Performance

Hardware- and Software-level Redundancy, Enhancing System Reliability

The switch utilizes a hybrid cable that implements both high-bandwidth data transmission and remote PoF power supply, realizing integrated installation and O&M, and simplifying all-optical network deployment.

Network Security Policies and Real-Time Monitoring, Delivering Enhanced Network Robustness

CPP

NFPP

INC Controller Achieves Easy and Efficient O&M Management

Chassis, Power Module, and Accessories